Cisco NAC3350-PROF-K9 Hardware Installation Guide

Summary of contents

  • Cisco NAC Appliance Hardware Installation Guide
  • Contents
  • About This Guide
  • Cisco NAC Appliance Hardware Platforms
    • About Cisco NAC Appliance
      • FIPS 140-2 Compliant and Non-FIPS Hardware Platforms
    • NAC-3315, NAC-3355, and NAC-3395
      • NAC-3315 Serial Number Location
      • Cisco NAC-3315 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
      • NAC-3355 Serial Number Location
      • Cisco NAC-3355 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
      • NAC-3395 Serial Number Location
      • Cisco NAC-3395 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
    • NAC-3310, NAC-3350, and NAC-3390
      • Cisco NAC-3310 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
      • Cisco NAC-3350 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
      • Cisco NAC-3390 Front and Rear Panels
        • Front Panel Features
        • Rear Panel Features
    • Cisco Product Identification Tool
  • Preparing for Installation
    • Safety Guidelines
      • General Precautions
      • Safety with Equipment
      • Safety with Electricity
      • Preventing Electrostatic Discharge Damage
      • Lifting Guidelines
    • Preparing Your Site for Installation
      • Site Planning
        • Rack Installation Safety Guidelines
          • Four-Post (Partially-Enclosed) Rack
          • Four-Post (Open) Rack
        • Site Environment
        • Airflow Guidelines
        • Temperature and Humidity Guidelines
        • Power Considerations
        • Method of Procedure
      • Shipping Package Contents
      • Failover Bundles
      • Required Equipment
      • Configuration Worksheets
        • Clean Access Manager (CAM) Configuration Worksheet
        • Clean Access Server (CAS) Configuration Worksheet
        • CAS Mode IP Addressing Considerations
    • Rack-Mounting Your Cisco NAC Appliance CAM/CAS
      • Mounting the NAC-3315 Appliance in a 4-Post Rack
        • NAC-3315 4-Post Rack-Mount Hardware Kit
        • Installing the NAC-3315 Slide Rails into a Rack
        • Installing the NAC-3315 Appliance into the Slide Rails
      • Mounting the NAC-3355/3395 Appliance in a Four-Post Rack
        • NAC-3355/3395 4-Post Rack-Mount Hardware Kit
        • Installing the NAC-3355/3395 Slide Rails Into the 4-Post Rack
        • Installing the NAC-3355/3395 Appliance Into the Slide Rails
    • Cisco NAC Appliance Licensing
    • Upgrading Cisco NAC Appliance Software
      • Downloading Cisco NAC Appliance Software
    • Upgrading Firmware
  • Installing the Clean Access Manager and Clean Access Server
    • Overview
      • Important Release Information
    • Installing the Clean Access Manager
      • Overview
      • Summary of Steps For New Installation
      • Connect the Clean Access Manager
      • Install the Clean Access Manager (CAM) Software from CD-ROM
      • Perform the Initial CAM Configuration
        • Configuration Utility Script
      • Access the CAM Web Console
      • Install CAM License
      • Add Additional Licenses
      • Important Notes for SSL Certificates
    • Installing the Clean Access Server
      • Overview
        • Switch/Router Configuration
      • Virtual Gateway Mode Connection Requirements
        • Switch Support for CAS Virtual Gateway/VLAN Mapping (IB and OOB)
        • Determining VLANs For Virtual Gateway
      • Summary of Steps For New Installation
      • Connect the Clean Access Server
      • Install the Clean Access Server (CAS) Software from CD-ROM
      • Perform the Initial CAS Configuration
        • Configuration Utility Script
      • Important Notes for SSL Certificates
    • Cisco NAC Appliance Connectivity Across a Firewall
      • Configuring the CAS Behind a NAT Firewall
    • Connectivity Across a Wide Area Network
    • Configuring Additional NIC Cards
    • Serial Connection to the CAM and CAS
      • Configuring Boot Settings on the Cisco NAC Appliance CAM/CAS
    • Useful CLI Commands for the CAM/CAS
      • CAM CLI Commands
      • CAS CLI Commands
        • CAS CLI Commands for Cisco NAC Appliance
        • CAS CLI Commands for Cisco NAC Profiler
    • Manually Restarting the CAM/CAS Configuration Utility
    • Troubleshooting the Installation
      • Verify/Change Current Master Secret on CAM/CAS
      • Recover From Corrupted Master Secret
      • Network Interface Card (NIC) Driver Not Supported
      • Resetting and Restoring an Unreachable Clean Access Server
      • Enabling TLSv1 on Internet Explorer Version 6
    • Powering Down the NAC Appliance
  • Configuring High Availability (HA)
    • Adding High Availability Cisco NAC Appliance To Your Network
    • Installing a Clean Access Manager High Availability Pair
      • CAM High Availability Overview
      • Before Starting
      • Connect the Clean Access Manager Machines
        • Serial Connection
      • Configure the HA-Primary CAM
      • Configure the HA-Secondary CAM
        • Complete the Configuration
      • Upgrading an Existing Failover Pair
      • Failing Over an HA-CAM Pair
      • Accessing High Availability Pair CAM Web Consoles
        • Determining Active and Standby CAM
        • Determining Primary and Secondary CAM
    • Installing a Clean Access Server High Availability Pair
      • CAS High Availability Overview
        • Failover Events
        • Choosing External IPs for Link-Based Failover
      • CAS High Availability Requirements
        • Physical Connection
        • Switch Interfaces for OOB Deployment
        • Service IP Addresses
        • Host Names
        • DHCP Synchronization
        • SSL Certificates
      • Before Starting
        • Selecting and Configuring the Heartbeat UDP Interface
        • Serial Port High-Availability Connection
      • Configure High Availability
        • Configure the HA-Primary Clean Access Server
          • a. Access the HA-Primary CAS Directly
          • b. Configure the Host Information for the HA-Primary CAS
          • c. Configure HA-Primary Mode and Update
          • d. Configure the SSL Certificate
          • e. Reboot the HA-Primary CAS
          • f. Add the CAS to the CAM Using the Service IP
        • Configure the HA-Secondary Clean Access Server
          • a. Access the HA-Secondary CAS Directly
          • b. Configure the Host Information for the HA-Secondary CAS
          • c. Configure HA-Secondary Mode and Update
          • d. Configure the SSL Certificate
          • e. Reboot the HA-Secondary CAS
        • Connect the Clean Access Servers and Complete the Configuration
      • Failing Over an HA-CAS Pair
      • Modifying CAS High Availability Settings
        • To Change IP Settings for an HA-CAS
      • Upgrading an Existing Failover Pair
    • Configuring High Availability for Virtual Gateway Mode
    • Useful CLI Commands for HA
      • Clean Access Manager
        • Verifying Active/Standby Runtime Status on the HA CAM
      • Clean Access Server
        • HA CAS Configuration Status
        • Heartbeat/Link-Based Connections
        • Link-Detect Interfaces
        • Active/Standby Status
      • Accessing High Availability Pair CAS Web Consoles
        • Determining Active and Standby CAS
        • Determining Primary and Secondary CAS
  • Password Recovery
    • Recovering Root Password for CAM/CAS
      • Recovering Root Password for CAM/CAS (Release 3.5.x or Below)
  • Open Source License Acknowledgements
    • Notices
      • OpenSSL/Open SSL Project
        • License Issues
  • Index
pdf background image
download button

Related manuals