Compaq StorageWorks 4000 Compaq StorageWorks Fibre Channel Troubleshooting Gui
Summary of contents
- Fibre Channel Troubleshooting Guide
- Notice
- Contents
- About This Guide
- Symbols in Text
- Compaq Technician Notes
- Where to Go for Additional Help
- Telephone Numbers
- Chapter 1: Introduction
- Fibre Channel Arbitrated Loop Components in a Primary Storage System
- Compaq StorageWorks RAID Array 4000 System with Redundant Components
- Fibre Channel Host Bus Adapter/P
- Fibre Channel Host Bus Adapter/E
- 64-Bit/66-MHz Fibre Channel Host Adapter
- RA4000 Controller
- Features
- Storage Hub 7
- Features
- Storage Hub 12
- Features
- GigaBit Interface Converter Module (GBIC)-Shortwave (SW)
- GigaBit Interface Converter Module (GBIC)-Longwave (LW)
- Fibre Channel Cable Option Kits
- Replacing Components in a Primary Storage System
- Replacing the Fibre Channel Host Bus Adapter
- Replacing the GBIC
- Replacing the RA4000 Controller without RA4000 Redundant Controller
- Replacing the RA4000 Controller with Redundant Controller
- Fibre Channel Arbitrated Loop Components in a Secondary Storage System
- Fibre Channel Host Bus Adapter/P
- Storage Hub 12
- Features
- Fibre Channel Tape Controller
- Features
- Fibre Channel Tape Controller II
- Features
- Fibre Channel Features
- GigaBit Interface Converter Module-Shortwave
- Fibre Channel Cable Option Kits
- Replacing Components in a Secondary Storage System
- Replacing the Fibre Channel Host Bus Adapter
- Replacing a GBIC
- Replacing a Storage Hub 12
- Replacing a Fibre Channel Tape Controller
- Chapter 2: Fibre Channel Fault Isolation Utility
- Installing the Utility
- Running the Utility
- Program Displays
- Display of a Fibre Channel Tape Controller
- Loop Error Histogram Display
- Display of a FC-AL with a Missing Fibre Channel Tape Controller
- Uninitialized Fibre Channel Arbitrated Loop Display
- Information and Updates
- www.compaq.com/support/techpubs/whitepapers.
- Chapter 3: Diagnostics
- Compaq Fibre Channel Diagnostics for Windows CE
- Compaq Fibre Channel Diagnostics for Windows 95/98
- Compaq Fibre Channel Backup Diagnostics for Windows NT
- Installing Compaq Fibre Channel Diagnostics for Windows CE
- Installing Compaq Fibre Channel Diagnostics for Windows 95 or 98
- Installing Compaq Fibre Channel Backup Diagnostics for Windows NT
- Chapter 4: StorageWorks RAID Array 4000 and 4100 Troubleshooting Flow Charts
- Overview of the Troubleshooting Flow Charts
- Verify System Operation
- Determine a Bad Link
- Some Fibre Channel Array Controllers Are Detected
- Visual and Physical Inspection of the FC_AL
- Checking the Link Between the Storage Hub and the Fibre Channel Array Controller
- Checking the Link Between the Storage Hub and the Fibre Channel Host Bus Adapter
- Fibre Channel Loopback Test
- Chapter 5: Secondary Storage System Troubleshooting Flow Charts
- Overview of the Troubleshooting Flow Charts
- Verifying FC_AL Operation
- Determining a Bad Link
- Some Fibre Channel Tape Controllers are Detected
- Visual and Physical Inspection of the FC_AL
- Checking the Link Between the Storage Hub 12 and the Fibre Channel Host Bus Adapter
- Checking the Link Between the Storage Hub 12 and the Fibre Channel Tape Controller
- Appendix A: Primary and Secondary Storage System LEDs
- Fibre Channel Host Bus Adapters
- RA4000 Controller
- Storage Hub 7
- Storage Hub 12
- Fibre Channel Tape Controller
- Fibre Channel Tape Controller II
- Appendix B: GBIC and Fibre Channel Cable Connector Cleaning Considerations
- Index