Compaq StorageWorks 64 FW 09.0200 HP StorageWorks Director and Edge Switch Rel
Summary of contents
- HP StorageWorks Director and Edge Switch release notes
- Description
- Devices supported
- Product models
- Switches
- Firmware 09.02.00
- Supported configurations
- Cable requirements
- Operating systems
- Languages
- Fixes
- Enhancements
- 4Gb Fibre Channel speed support for Director 2/64
- PFE feature bundling and trial PFE key support
- Supported Fabric Size Zoning Limits Increased
- Increased Domain ID Configuration Options
- WWN Aliases are available on Edge Switches
- Password Expiration
- Login Banner
- Advanced Fabric Diagnostics
- FC Ping CLI command
- Hot Device Detection (HDD) CLI command
- Nameserver Snaphot Tools CLI commands
- Global Nameserver Display CLI command
- Route Table Display CLI command
- Compatibility and interoperability
- HAFM and firmware compatibility
- Standards compliance
- Firmware installation
- Prerequisites for installing and using firmware 09.02.00
- Upgrading from an earlier version of firmware
- Upgrading firmware on a Director from 04.xx.xx to 05.xx.xx
- Upgrading firmware on an Edge Switch from 04.xx.xx to 05.xx.xx
- Considerations for downgrading the firmware version
- HAFM upgrade required for firmware 09.02.00
- Important information
- Default zone is disabled by default
- Some IP addresses must be avoided
- Zoning limits
- Using the same firmware level
- Reinstalling feature licenses
- CTP controls port lights
- Full-fabric capability for Edge Switch 2/12
- Support for speed Auto-Negotiate
- Known issues in firmware 09.02.00
- Determining current version
- Using HAFM Basic
- Using Embedded Web Server
- Using the CLI
- Using HAFM
- Supersedes history
- Effective date