Sony PCS-1P manual

Summary of contents

  • Cover
  • Table of Contents
  • 1. Installation
    • 1-1. Caution on Installation
      • 1-1-1. Lay Out the Videoconferencing Room
      • 1-1-2. Operating Environment
    • 1-2. Flowchart of Installation
    • 1-3. System Connections
      • 1-3-1. When Used in LAN (100BASE-TX/10BASE-T)
      • 1-3-2. When Used in ISDN
    • 1-4. Initialization
      • 1-4-1. Inserting Batteries into the Remote Commander
      • 1-4-2. Turning On/Off the TV Monitor Together With the Communication Terminal
      • 1-4-3. Adjust the Volume of a Monitor Television
      • 1-4-4. Installing the Communication Terminal and Camera
      • 1-4-5. Turning On
      • 1-4-6. When the power is first turned on after installation
    • 1-5. System Setting
    • 1-6. Flowchart of Opening Test
      • 1-6-1. Dialing Procedure of ISDN
      • 1-6-2. Answering Procedure of ISDN
      • 1-6-3. Dialing Procedure of LAN
      • 1-6-4. Answering Procedure of LAN
  • 2. Maintenance
    • 2-1. Confirmation Procedure of Local Terminal Operation Using Self-Loop
    • 2-2. LAN Communication Test using Ping
    • 2-3. Locating the Components
    • 2-4. Operation Log
    • 2-5. Updating of Software
      • 2-5-1. Updating Using Memory Stick
    • 2-6. Service Mode
  • 3. Compatibility in LAN Network
    • 3-1. Connection via Hub
    • 3-2. Connection via Router
    • 3-3. Connection via DHCP
    • 3-4. Connection via Gatekeeper
    • 3-5. Connection via DHCP and Gatekeeper
    • 3-6. Connection beyond NAT
    • 3-7. Connection using PPPoE
  • 4. Technical Data
    • 4-1. PCS-1/1P Port Number Used
      • 4-1-1. During P-P Connection (Default)
      • 4-1-2. P-P Connection (Custom: When TCP port number is set to 3000 and UDP port number is set to 3100)
      • 4-1-3. During Use of Internal MCU Function (Default)
      • 4-1-4. During Use of Internal MCU Function (Custom: When TCP port number is set to 3000 and when UDP port number is set to 3100)
    • 4-2. Setting of PCS-1/1P and HUB
    • 4-3. Audio and Video Input/Output Characteristics
      • 4-3-1. Audio input/output characteristics of PCS-1/1P
      • 4-3-2. Video input/output characteristics of PCS-1/1P
    • 4-4. Audio Selection List of PCS-1/1P
    • 4-5. Remote Motion Picture Display during Multipoint Connection of PCS-1/1P
      • 4-5-1. Remote Motion Picture Displayed at Each Point in Audio Detection Mode
      • 4-5-2. Remote Motion Picture at Each Point in Broadcast Selection Mode
      • 4-5-3. Remote Motion Picture at Each Point in Split Mode
    • 4-6. Display Transition List of PCS-1/1P
    • 4-7. Priority Level List of Video and Audio Codec
    • 4-8. Conference Connection Format and Its Corresponding Usable Codec List
pdf background image
download button

Related manuals